Stellite 4 Alloy

Stellite 4 Alloy

Stellite alloys are a group of cobalt-chromium alloys known for their exceptional wear resistance, high temperature performance and corrosion resistance.
Send Inquiry
Product Introduction

Nominal Composition (Mass %) and Physical Properties

Co

Cr

W

C

Others

Hardness

Density

Melting Range

Base

30

14

1

Mn, Fe, Si, Ni

45-49 HRC

8.61 g/cm3
0.311 lb/in3

1340-1395ºC
2245-2545ºF

Stellite cobalt-based alloys consist of complex carbides in the alloy matrix. They are resistant to abrasion, abrasion and corrosion and retain these properties at high temperatures. Its excellent wear resistance is mainly attributed to the unique inherent properties of the hard carbide phase dispersed in the CoCr alloy matrix.

Stellite 4 is a cobalt-based alloy with higher wear resistance than Stellite 6 and is used in applications subject to only moderate mechanical impact. It is a machinable cast alloy with excellent high temperature strength due to its high tungsten and carbon content. It has very good wear resistance at room and high temperatures. It exhibits a very low coefficient of friction when rubbing against itself and hard steel.

Stellite 4 is commonly used in molds, hot pressing and hot extrusion of copper-based and aluminum alloys. It has also been successfully used in pumps operating in corrosive and erosive conditions. Stellite 4 is also used for bushings and sleeves in the zinc-aluminum hot-dip coating process.

Hot Tags: stellite 4 alloy, China stellite 4 alloy manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry