Superalloy Titanium Gas Turbine Blades

The titanium alloy turbine blades we manufacture have the following particularities:
1. Poor working conditions: turbine blades are directly exposed to high temperature, high pressure and high speed gas flow, while bearing the comprehensive effects of high temperature, complex stress, thermal fatigue, gas corrosion and other factors.

2. High performance requirements: it needs to have good mechanical properties, including high temperature creep performance, mechanical fatigue performance, thermal fatigue performance and impact resistance, as well as good high temperature plasticity; To have good thermal corrosion resistance and oxidation resistance; It has good process properties, such as casting performance, welding performance, high thermal conductivity, low thermal expansion coefficient and small density, etc. High initial melting temperature, can withstand short - time overtemperature; It also needs to have good organizational stability.

3. Great influence on engine performance: turbine is not only a self-supporting component, but also the main power-doing component in aero-engine. Its performance level, especially the temperature bearing capacity, has become an important symbol of the advanced degree of engine. The use of high performance titanium alloy materials can increase the turbine inlet temperature and obtain more thrust without changing the weight of the engine, thus improving the thrust-to-weight ratio.
4. Continuous development of material technology: from the initial use of superalloys, to the development of directional solidification superalloys, single crystal superalloys, etc. The progress of material technology is the key to improve the temperature bearing capacity of turbine blades and the overall performance of engines.

5. Complex manufacturing process: the casting process of titanium alloy is relatively complex. For example, the casting of single crystal superalloy needs to go through vacuum melting for many times to strictly control the impurity elements, and then the investment casting is carried out through directional solidification technology, and finally the final casting state is achieved through solid solution and aging heat treatment.
Taking nickel-based superalloy as an example, it can better meet the harsh requirements of turbine blades. Nickel base superalloys have excellent high temperature strength, good oxidation resistance and thermal corrosion resistance, good fatigue property, fracture toughness and other comprehensive properties. Although the service temperature of iron-based superalloys can only reach 750-780℃ in general, which is difficult to meet the requirements, and cobalt-based superalloys are not used much due to the small output of cobalt resources and difficult processing, most turbine blades are still produced with nickel-based superalloys as raw materials.


In addition, titanium aluminum alloy also has the advantages of high strength, good stability and low density, which can improve fuel efficiency and is sought after by engine manufacturers. However, it is difficult to manufacture, for example, in the process of integrated molding manufacturing, it is necessary to find the right container material, but also to solve the problems of titanium activity and easy reaction with other materials, the surface of the container material is easy to fall off the slag pollution of titanium and aluminum melt. OBT Machinery Company has 15 years of high temperature alloy casting experience, not only can accurately select the alloy raw material, It can also produce high quality parts such as turbine blades.



Hot Tags: superalloy titanium gas turbine blades, China superalloy titanium gas turbine blades manufacturers, suppliers, factory, Titanium Alloy Casting Turbine, Cnc Machining Titanium Turbine, Titanium Alloy Gas Turbine, Titanium Alloy Turbine Wheel, High Precision Turbine, Titanium Alloy Turbine
Previous
Gas Turbine ImpellersYou Might Also Like
Send Inquiry


















